Jp4: Vr/Chipset Control Selector; Sw1: Clear Cmos - Winmate IK32 User Manual

USER MANUAL

2.4.4 JP4: VR/Chipset Control Selector

2.4.5 SW1: Clear CMOS

Please follow the instructions below to change CMOS settings. Remember to set
jumper back to Normal before turning on the power supply.
CAUTION
TURN OFF the power supply before setting Clear CMOS.
Step 1: To set the jumper to "clear" position, switch 1 to 0, 2 to N.
Step 2: To set the jumper to "normal" position, switch 0 to 1, N to 2.
CHAPTER 2
Setting
1-3 (Default)
2-4 (Default)
3-5
4-6
- 30 -
HARDWARE INSTALLATION
Function
VR Control
Chipset