Display And Control Elements / Connections; Preparing Start-Up; Installing The Truma App On A Mobile Terminal Device - Truma iNet Box Operating Instructions Manual

Display and control elements / connections

Display elements
Figure 1 – Front view
Blue LED (BLUETOOTH)
– flashes upon pairing
– lights up briefly following a reset to the factory settings and
appliance search at TIN 2
– lights up continuously when there is a Bluetooth connection
Green LED (POWER)
– flashes during start-up and lights up during operation
Red LED (GSM)
– lights up when GSM operation is not possible.
– flashes when GSM operation is not set up
– does not light up when GSM operation is set up
4
iNet Box
Control elements / connections
1
Figure 2 – Top view
1
Button
Connect BLUETOOTH, reset to the factory settings and
perform appliance search
2 Mini-SIM (25 x 15 mm)
3 External antenna connection for GSM antenna
4 Changeover switch internal / external GSM antenna

Preparing start-up

Installing the Truma App on a mobile terminal
device
1. Load the Truma App from the Apple AppStore or
Google PlayStore onto the mobile terminal device.
2. Install the Truma App on the mobile terminal device.
If necessary, an installed Truma App must be updated.
3. If the Truma App is to be used on several mobile terminal
devices, steps 1 and 2 must be repeated for each mobile
terminal device.
4. To continue installation, follow the instructions in the
Truma App or the instructions below.
2 3 4