Gsm Communication; Prepare The Truma Inet Box - Truma iNet Box Operating Instructions Manual

Several mobile terminal devices can be logged on at the
Bluetooth connection (mobile phones, tablet PCs). Four
mobile terminal devices can control the Truma iNet Box at the
same time.
The first mobile terminal device set up (administrator) remains
permanently in the Truma iNet Box memory. If the maximum
number of mobile terminal devices has been reached, the
new mobile terminal device overwrites the oldest one in the
memory (except the administrator).
The first mobile terminal device set up (administrator)
can only be deleted by restoring to the factory setting
(see "Factory setting" on page 11) in the Truma iNet Box.
The Bluetooth pairing mode is automatically ended
following a successful set-up.

GSM communication

Prepare the Truma iNet Box

A Bluetooth connection must first be established before
the GSM communication can be set up and operated.
A Mini-SIM card with its own call number and sufficient credit
is required for GSM communication. The Mini-SIM card is not
included in the scope of delivery.
Inserting the Mini-SIM card
– Push the Mini-SIM card into the "SIM" slot as shown (Fig-
ure 3) until it engages.
– When doing this, make sure that the card is inserted into
the guide provided for that purpose and that it is under no
circumstances inserted the wrong way round.
6
Figure 3 – Mini-SIM card
Removing the Mini-SIM card
– Pressing the Mini-SIM card again enables it to be removed.
If you have any questions about your Mini-SIM card,
contact your mobile phone supplier
iNet Box