Installation Of The Boiler Module; Integral Rf Boiler Control; Features; Mounting The Rf Integral Boiler Control To The Boiler - Salus iT500BM Installer Manual

2. Installation of the boiler module

RXVBC605
Page 03 - 05
INTRODUCTION
The RXVBC605 is an integral plug-in RF boiler control. The RF boiler control is a direct
replacement for the basic time clock or blanking plate usually supplied with the boiler.
Installing the RF boiler control takes minutes. Once installed, you will benefit from all
the control features of the Salus room thermostat.

INTEGRAL RF BOILER CONTROL

The Integral RF boiler control is the RF receiving unit for your RF room thermostat. This
unit uses a plug-in connection to connect directly to your boiler and provides the ON/OFF
switching.

Features

• LED status indication
• Plug-in connection to boiler
• 3 position switch
• 868 MHz communication

Mounting the RF Integral Boiler Control to the boiler

DANGER!
• 24V & 230V: Do not touch electrical components or circuits
• Isolate mains electricity supply before starting any
work and observe all relevant safety precautions
• Follow electro static discharge precaution
• Do not touch any visible PCB parts or components
RXWBC605
Page 06 - 09
RXBC605
Page 10 - 11
iT500BM Installer Manual 03