Danfoss VLT Aqua Drive FC 202 Operating Manual page 12

Safety
Voltage [V]
2 2
200–240
380–480
525–600
525–690
Table 2.1 Discharge Time
WARNING
LEAKAGE CURRENT HAZARD
Leakage currents exceed 3.5 mA. Failure to ground the
frequency converter properly can result in death or
serious injury.
•
Ensure the correct grounding of the equipment
by a certified electrical installer.
WARNING
EQUIPMENT HAZARD
Contact with rotating shafts and electrical equipment
can result in death or serious injury.
•
Ensure that only trained and qualified personnel
perform installation, start-up, and maintenance.
•
Ensure that electrical work conforms to national
and local electrical codes.
•
Follow the procedures in this guide.
WARNING
UNINTENDED MOTOR ROTATION
WINDMILLING
Unintended rotation of permanent magnet motors
creates voltage and can charge the unit, resulting in
death, serious injury, or equipment damage.
•
Ensure that permanent magnet motors are
blocked to prevent unintended rotation.
CAUTION
INTERNAL FAILURE HAZARD
An internal failure in the frequency converter can result
in serious injury when the frequency converter is not
properly closed.
•
Ensure that all safety covers are in place and
securely fastened before applying power.
10
VLT
Minimum waiting time (minutes)
4 7
0.25–3.7 kW –
(0.34–5 hp)
0.37–7.5 kW –
(0.5–10 hp)
0.75–7.5 kW –
(1–10 hp)
– 1.1–7.5 kW
(1.5–10 hp)
Danfoss A/S © 10/2016 All rights reserved.
®
AQUA Drive FC 202
15
5.5–45 kW
(7.5–60 hp)
11–90 kW
(15–121 hp)
11–90 kW
(15–121 hp)
11–90 kW
(15–121 hp)
MG20MD02