User Maintenance - Mira Jump 96Va Installation And User Manual

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
There are no user serviceable
parts inside the shower. Only
qualified, competent personnel
should Remove the front cover,
mains connections are exposed
when the cover is Removed.
Switch the shower off at the isolator
switch before performing any user
maintenance or before cleaning
the shower.
DO NOT allow young children
to perform user maintenance
including cleaning of the shower.
Cleaning
Many household cleaners contain abrasives and chemical substances, and should not
be used for cleaning plated or plastic fittings. These finishes should be cleaned with
a mild washing up detergent or soap solution, and then wiped dry using a soft cloth.
De-scaling the Showerhead
Important! Keeping the showerhead
clean and free from limescale will ensure
that your shower and showerhead
continue to perform to their maximum.
A blocked showerhead can restrict the
flow rate and may cause damage to
your shower
Inspecting the hose.
Important! The shower hose should
be inspected periodically for damage
or internal collapse, internal collapse
can restrict the flow rate from the
showerhead and may cause damage to
the shower. Remove the shower hose
from the shower, inspect and replace the
hose if necessary.

USER MAINTENANCE

DO NOT use the showerhead to
clean the shower.
If the shower is not to be used for
a long period, the electrical supply
and water supply to the shower
should be isolated. If the shower
or pipework is at risk of freezing
during this period a qualified,
competent person should drain
them of water.
Unscrew the hose from
the showerhead and
the shower outlet.
23
Use your thumb or a
soft cloth to wipe any
limescale from the
soft nozzles
Inspect the hose.