Adjustment For Right Hand Entry Electrical Supply
Isolate the electrical and water
1
supplies.
Unscrew the terminal block
2
retaining screw.
Carefully lift the terminal block
3
from its location on the left of the
case and remove the retaining
screw.
Taking care not to damage the
4
wires, reposition the terminal
block and the splashguard to the
location on the right hand side of
the case.
Refit and tighten the retaining
5
screw. Make sure that the
splashguard remains in place.
Check the wiring and ensure that
6
it has not been damaged and will
not be trapped.
13
Terminal block
alternative
location