Chapter 5 - Regulatory Information; 47 Cfr Part 15 Regulation Class B Devices; Fcc Notice; Industry Canada Class B Notice - Multitech MultiConnect Conduit Getting Started Manual

Chapter 5 – Regulatory Information

47 CFR Part 15 Regulation Class B Devices

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

FCC Notice

MTDOT-x products are open development based products that contain a sub GHz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS-210:2010)
The MTAC-LORA is open development based product that contains a sub GHz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS-210:2010)
xDot products are open development based products that contain a sub ghz radio technology. MultiTech has
certified for compliance with US and Foreign compliance bodies including FCC, R&TTE and others. (e.g. FCC
15.247:2015 & IC RSS 247:2015)
MultiTech provides software code meant to operate the radio to a level that maintains compliance with the
operating modes under which these radio devices were certified. To ensure this level of compliance, the software
code is provided in binary form only. Users are prohibited from making any changes that affect the operation of
the radio performance. Accessing or controlling the radio through any means other than the provided binary
software will require the user to obtain their own intentional radiator license from the certification body governing
their locality, as all pre-certification provided with mDot MTAC-LORA xDot will have been made invalid.

Industry Canada Class B Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel
brouilleur.
This device complies with Industry Canada license-exempt RSS standard(s). The operation is permitted for the
following two conditions:
® TM
MultiConnect Conduit Base Station IP67 Getting Started Guide for Versions 1.5 and 2.1
REGULATORY INFORMATION
27