Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Multitech MultiVOIP MVPGK1 Gatekeepers
Summary of Contents for Multitech MultiVOIP MVPGK1 Gatekeepers
- Page 1 Quick Start Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes in the content hereof without obligation of Multi-Tech Sys- tems, Inc.
-
Page 3: Table Of Contents
Contents 1 Installation Introduction ... 1 Overview ... 1 Unpacking ... 1 Safety Warnings ... 2 Mounting the Gatekeeper in a Rack ... 3 Cable Connections ... 3 Single Board Computer ... 4 Network Interface Card ... 4 Power Supply ... 5 2 Software Setup Overview ... - Page 4 MultiVOIP Gatekeeper...
-
Page 5: Installation
Unpack the unit and inspect it for visible shipping damage. If damage is observed, do not turn on the unit; contact Multi-Tech's Tech Support for advice. If no damage is observed, place the Gate- keeper in its final location. -
Page 6: Safety Warnings
• A system CD containing the Gatekeeper software, NIC drivers, and hardware and software user guides • An overnight contract If any of these items are missing, please contact Multi-Tech Systems or your dealer/distributor. You must supply the following items: •... -
Page 7: Mounting The Gatekeeper In A Rack
Mounting the Gatekeeper in a Rack The Gatekeeper may be used as a desktop unit or mounted in a standard 19-inch rack enclosure. When mounting it in a rack, attach it securely with the four mounting screws included in your Gatekeeper kit. Caution: To prevent personal injury or damage to the unit, two people should mount the Gatekeeper into a rack. -
Page 8: Single Board Computer
MultiVOIP Gatekeeper Single Board Computer The SBC has three connectors, as illustrated in Fig. 2. Fig. 2. SBC connectors Network Interface Card The 10/100Mb PCI EtherNet network interface card is located as shown in Fig. 3. The NIC has a single RJ-45 UTP connector and three LED indicators. -
Page 9: Power Supply
Quick Start Guide Power Supply Plug one end of the supplied power cord into the Gatekeeper, and the other end into an AC power source, such as a wall socket, power strip, or UPS. To turn on the system, press the power switch, which is locat- ed next to the floppy disk drive. -
Page 10: Software Setup
The first time you start Windows, enter the following user name and password into the Logon Information dialog box: User name: administrator Password: MVPGK1 These are the default user name and password; you can change them or add new accounts as you wish. Please note that the password is all upper case. -
Page 11: Gatekeeper Software Setup
7. Click OK to exit the Network dialog box. Gatekeeper Software Setup The Gatekeeper software is installed with a default 20-user license file. For additional user licenses, contact Multi-Tech Sales at 888-288-5470 (U.S./Canada) or +763-785-3500. When ordering, you will need the Gatekeeper software Product ID code, which you can obtain by clicking About MultiVOIP Gatekeeper in the Help menu. - Page 12 82099221...
Need help?
Do you have a question about the MultiVOIP MVPGK1 Gatekeepers and is the answer not in the manual?
Questions and answers