Chapter 5 - Regulatory Information; Regulatory Compliance Mark (Rcm); Restriction Of The Use Of Hazardous Substances (Rohs) - Multitech MultiConnect Conduit MTCDT-LAP3 Hardware Manual

REGULATORY INFORMATION
Chapter 5 – Regulatory Information

Regulatory Compliance Mark (RCM)

This product complies with the requirements of the Regulatory Compliance Mark (RCM) for Electrical Regulatory
Authorities Council (ERAC), Electrical Equipment Safety System (EESS), and the Australian Communications and
Media Authority (ACMA) for Electromagnetic Compatibility (EMC).

Restriction of the Use of Hazardous Substances (RoHS)

Multi-Tech Systems, Inc.
Certificate of Compliance
2011/65/EU
Multi-Tech Systems, Inc. confirms that its embedded products comply with the chemical concentration limitations
set forth in the directive 2011/65/EU of the European Parliament (Restriction of the use of certain Hazardous
Substances in electrical and electronic equipment - RoHS).
These MultiTech products do not contain the following banned chemicals
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6] < 1000 PPM
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Environmental considerations:
Moisture Sensitivity Level (MSL) =1
Maximum Soldering temperature = 260C (in SMT reflow oven)
1
Lead usage in some components is exempted by the following RoHS annex, therefore higher lead concentration
would be found in some modules (>1000 PPM);
20
1
:
® TM
MultiConnect Conduit MTCDT-LAP3 Hardware Guide (AU)