Controls, Features And Connections - Pro-Ject Audio Systems Signature 12 Instructions For Use Manual

Controls, features and connections

1 Platter
2 Platter shaft
3 Drive pulley
4 Drive belt
5 Idler pulley shaft
6 Idler pulley
7 Platter belt
8 Transport screws
9 Adjustable feet
10 Tonearm
11 Azimuth set screw
12 VTA locking screw
13 VTA set screw
14 Mounting distance adjusting screw
15 Locking screw for mounting distance adjusting
16 Power supply
17 Control panel
18 ON/OFF switch
The device is transported in a partially disassembled to prevent damage sensitive parts.
Check the packaging and the device immediately if they were not damaged during transport.
Damaged devices not operate.
Compare the data for electrical connection on the plate with the data network.
These data must match in order to avoid damage of the turntable.
2
© Pro-Ject Audio Systems · Pro-Ject Signature 12 · Revision 2014.11.04
pic