Maintenance And Cleaning - Pro-Ject Audio Systems Signature 12 Instructions For Use Manual

Technical specifications Pro-Ject SIGNATURE 12
Nominal speeds
Switching speeds
Speed variance
Wow and flutter
Signal to noise
Drive
Motor
Platter
Power supply
Power consumption
Dimensions
Weight
Effective tonearm length
Effective tonearm mass
Mounting distance
Overhang
Offset angle
Inner nullpoint
Vertical tracing force range

Maintenance and cleaning

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic
cloth. Never use a dry cloth because this will create static electricity which attracts more dust! Antistatic
cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber
parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching.
Always disconnect the record player from the mains power supply as a precaution before maintenance!
!
18
© Pro-Ject Audio Systems · Pro-Ject Signature 12 · Revision 2014.11.04
33,3/45,11 r.p.m
electronic, by LCD display
0,1%
0,08%
-75 dB
3x silicon drive belt
2x micro-processor synchronous motors
Aluminium alloy Ø300mm
switch mode power supply
20W DC
570 x 440 x 234mm (WxHxD)
34,3 kg
12"(304,8mm)
19,5g
291,6mm
13,2mm
18°
r= 62,5mm;r=125.85mm
0-30mN