Pro-Ject Audio Systems Signature 12 Instructions For Use Manual page 14

For optimum positioning of a turntable is supplied Pro-Ject LEVEL IT
6. Connect the turntable to the power supply and amplifier
Turntable is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house.
Connect the low voltage plug from the power supply to the socket on the rear of the turntable before
connecting the power supply to the mains.
Connect the signal cable to your phono preamplifier
Red – right channel
White – left channel
7. The turntable control

Turn on the switch located in the bottom of plinth
Turntable control is performed by the touch screen.
After turning the switch on, the display shows logo Pro-Ject.
Touching the screen you can control the turntable functions.
14
© Pro-Ject Audio Systems · Pro-Ject Signature 12 · Revision 2014.11.04