Controls, Features And Connections - Pro-Ject Audio Systems Debut PRO Instructions For Use Manual

Controls, features and connections

1 Motor with TPE damped flange
2 Stepped drive pulley
3 Drive belt
4 Sub-platter
5 Platter with TPE damping and felt mat
6 Tonearm counterweight
7 Tonearm rest and removable transport lock
8 Tonearm lift lever
9 Tonearm base with VTA adjustment
10 Tonearm tube
11 Lid
12 Lid hinges
13 Hinge fasteners
14 Phono output sockets and earth connection
15 Power supply socket
16 Anti-skating weight
17 Anti-skating weight support hoop
18 Anti-skating weight adjustment scale
19 Height adjustable feet with TPE damping
20 Speed selector
21 Headshell with finger lift and fitted Pro-Ject Pick it PRO
22 Single adapter
Phono cable Connect it E (not shown)
Stylus pressure gauge (not shown)
Two-point cartridge alignment protractor (not shown)
Round drive belt (78 RPM)
Flat drive belt (33, 45 RPM)
Allen key 1.5mm, 2mm
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a
suitable receptacle. Before starting to assemble, get familiar with the parts listed above and
correspondingly numbered in the technical drawings above.
© Pro-Ject Audio Systems · Pro-Ject Debut Pro · Revision 2021.09.01
Pro-Ject Debut PRO
3