Matthews Marking Systems I-Mark SX-32e Technical Manual page 35

I•Mark SX-32e Technical Manual Version: 8 Issue: 1
Print Relay Signal
Current relay settings screen
For setting the relay output to either off or to print status. When set to print status a
signal is sent through the 15 pin I/O encoder port, whenever the print head is active.
Refer to "Print Relay Signal" on page 19 for further information regarding the port
settings.
Date and Time Settings
Current date and time settings screen
For setting the date and time for all messages containing a date or time.
This function is used to set the control unit's internal (master) clock. Note that all
time and date objects are set relative to this clock. If this clock is set incorrectly all
other dates and times will be equally incorrect.
The master clock has battery backup and will therefore retain the date and time
setting while the SX-32e is switched off. Also the date and time will be reset to the
user setting after factory settings have been restored.
Calendar Names
Current date and time settings screen
The calendar names function is used to change the designations, assigned to the
following items:
• Day names (max 16 characters)
I N S TA L L A T I O N
33