Setup Mode
Recipe Setup Screen 7
F
. 45. Recipe Screen 7
IG
This screen appears only if Flush and Fill Input is set to
"Recipe" in Option Screen 1, page 34 and Special Out-
puts is set to 1, 2, 3, 4, or "3 + GFB on #4" in Configure
Screen 5, page 33. The I/O board has four programma-
ble outputs.
NOTE: If the Special Outputs is set to "3 + GFB on #4",
the Recipe 0 Screen 4 does not display the column of
information for Special 4. That Output assumes the val-
ues assigned to GFB #1.
On-Purge
Delay time at the start of the purge cycle before the Spe-
cial Output turns on.
Length
Duration for the Special Output to be active during the
purge cycle.
On-Fill
Delay time at the start of the fill cycle before the Special
Output turns on.
Length
Duration for the Special Output to be active during the
fill cycle.
44
312776K