Graco ProMix 2KS Operation Manuals page 32

Setup Mode
Configure Screen 3
F . 24. Configure Screen 3
IG
1K/2K/3K
Set this value to indicate the system performance level
designation. Selecting a value other than the installed
system level will result in restricted functionality.
Run Mode
NOTE: If an Autokey is installed, additional selections of
Semi-Automatic and Automatic are available.
Indicates that this is a Manual system.
Dump Valve A
This field only appears if the color change option is
detected from the cc board. Select "On" if an optional
Dump Valve A is installed and desired to be used.
Dump Valve B
This field only appears if the catalyst change option is
detected from the cc board, meaning that dump valve B
is present. On is the only setting.
3rd Flush Valve
Off is default. If the system includes an optional 3rd
flush valve, set to On.
32
Configure Screen 4
F . 25. Configure Screen 4
IG
Dose Time Alarm
Enter the dose time (1 to 99 seconds). This is the
amount of time allowed for a dose to occur before a
dose time alarm occurs.
Dose Size
Select the total dose size (cc) from the pulldown menu:
100, 50, 25, 10, or select DD to turn on dynamic dosing
(see page 50).
Example:
For a total dose size of 50 cc and a ratio of 4.0:1, the
component A dose size is 40 cc and component B dose
size is 10 cc.
NOTE: Increase the dose size in applications with
higher flow rates or wider ratios. Decrease the dose size
for a better mix under low flow conditions.
Number of Guns
Enter the number of spray guns (1 or 2).
Gun Flush Box
Enter the number of gun flush boxes (Off, 1, or 2).
NOTE: For color change and flushing purposes, it is rec-
ommended that two GFBs are installed when using a
2-gun system.
DD Setup Mode
See Fig. 26 and Fig. 27 on page 33.
312776K