Graco ProMix 2KS Operation Manuals page 88

Alarm Troubleshooting
E-9: Not used
E-10: REMOTE STOP ALARM
Automation has requested that the system abort all oper-
ations.
E-11: PURGE VOLUME ALARM
ProMix 2KS solvent flow switch is not activated while
purging.
Minimum flush volume is not achieved.
No meter pulses during Color/Catalyst Dump.
88
Table 11. Alarm Troubleshooting
Cause
Cause
Solution
Abort operations. Troubleshoot automation system.
Solution
Verify that the gun is not shut off and that the solvent
flow switch is activated while purge is taking place.
Increase solvent supply or decrease minimum volume
setting.
Color change solvent supply not set up or functional.
Check Color Change setup.
312776K