Graco ProMix 2KS Operation Manuals page 29

Component
EK (EasyKey)
FP (Fluid Plate)
BC (Booth Control)
C1/C2 (Color Change
Modules 1 and 2)
AK (Autokey)
XP (XPORT)
MC (Micro Controller)
Axx By Cz
IP (Internet Address)
MAC (MAC address)
312776K
Table 4: Component Software Versions
Display (may
vary from
examples shown) Description
3.01.001 EasyKey software version.
3.01.001 Fluid Plate software version.
-.- Booth Control not installed, not detected, or not operational.
1.XX Booth Control software version 1.00 or 1.01.
2.XX Booth Control software version 2.XX.
-.- Color Change Module 1/2 not installed, not detected, or not
operational.
1.XX Color Change Module software version 1.00 or 1.01.
2.XX Color Change Module software version 2.XX.
No Key No AutoKey installed or detected. System operates in 2K
Manual Mode only
2K-Auto 2K AutoKey detected. System can operate in 2K Manual,
Semi-automatic, or Automatic Mode.
3K-Auto 3K AutoKey detected. System can operate in 3K Manual,
Semi-automatic, or Automatic Mode.
V6.6.0.2 Example of XPORT network module software version. Other
versions are acceptable.
1042.0198 Example of fluid plate micro controller version. Other versions
are acceptable.
A30 B4 Cx Color Change board valve configuration. This shows the num-
ber of valves available for each of the components. This is set
by the configuration switches on the color change boards
connected to the system.
Code
-
x
1
4-30
192.168.178.3 Example of the address EasyKey is set to for basic and
advanced web interface reporting.
00204AAD1810 Example of internet MAC address. Each EasyKey will have a
different value in this format.
Description
Component not available with this machine configura-
tion.
Component not used with this machine configuration.
Component available but no change stack.
Component available with change stack.
Number of valves flushed with a solvent valve.
Setup Mode
29