Datalogic Magellan 800i Product Reference Manual page 129

Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the Length 1, Length 2
Programming Instructions below.
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
fixed length) by following the
Instructions
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the minimum length by following the
Length 2 Programming Instructions
5. Set Length 2 to the maximum length by following the
1, Length 2 Programming Instructions
010200(CR)
Fixed Length Decoding
Product Reference Guide
Datamatrix Length 1, Length 2 Programming
below.
Enter/Exit Programming Mode
Datamatrix Length 1,
below.
Datamatrix Length
below.
Variable Length Decoding
DEFAULT
010201(CR)
121