Aztec Length 1, Length 2 Programming Instructions - Datalogic Magellan 800i Product Reference Manual

Enter/Exit Programming Mode
043200(CR)
Fixed Length Decoding

Aztec Length 1, Length 2 Programming Instructions

1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
NOTE
Scan the END bar code.
DEFAULT SETTING FOR THIS FEATURE: 0001
0433(CR)
Set Length 2
128
Alphanumeric Pad
senting the length.
For Aztec labels, only the data characters are included in
the length calculations.
Any value set higher than 3700 will be considered to be
2710.
Variable Length Decoding
DEFAULT
and scan the four digits (zero-padded) repre-
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 2710
2D Symbologies
043201(CR)
0434(CR)
Magellan™ 800i Scanner