Aztec; Disable/Enable Aztec; Length Control - Datalogic Magellan 800i Product Reference Manual

Aztec

Disable/Enable Aztec

When disabled, the scanner will not read Aztec labels.
043000(CR)
Enable Aztec

Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the Length 1, Length 2
Programming Instructions below.
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
fixed length) by following the
Instructions
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the minimum length by following the
Length 2 Programming Instructions
5. Set Length 2 to the maximum length by following the
Length 2 Programming Instructions
Product Reference Guide
When fixed length decoding is enabled, the scanner
When variable length decoding is enabled, the scan-
Aztec Length 1, Length 2 Programming
below.
Enter/Exit Programming Mode
Disable Aztec
DEFAULT
Aztec Length 1,
below.
Aztec Length 1,
below.
043001(CR)
127