Table of Contents
Advertisement
2.2.7
Setting the unit type
(see chapter 2.2.6)
Model type
PHXX
(see chapter 2.2.8)
With this setting you determine the unit type. Afterwards, in the operating display PH15 (for PH15
and PH15A) or PH27 (for PH27 and PH27A) or PH28 (for PH28 and PH28A) is displayed.
Available settings:
Factory setting:
Notes on setting:
2.2.8
Interrogation of the software version
(see chapter 2.2.7)
Software
VX.XX
(see chapter 2.2.1)
Note: This is a display function only.
Model type
New Value
Model type
Old Value
PH15 (tank version), PH15A (fresh water version),
PH27 (tank version), PH27A (fresh water version)
PH28 (tank version), PH28A (fresh water version)
depending on the unit
This setting must be made only after the control board has been replaced or
after resetting the unit to factory defaults.
modify
confirm
cancel
9
Model type
PHXX
PH15 or PH15 A
PH27 or PH27A
PH28 or PH28A
Advertisement
Table of Contents
