Checking The Buzzer; Resetting The Unit To Factory Default Settings - Defensor H15A Service Manual

16
2.3.14

Checking the buzzer

(see chapter 2.3.13)
(see chapter 2.3.15)
With this function you can check the functionality of the buzzer (0= buzzer off and buzzer levels 1...3).
2.3.15

Resetting the unit to factory default settings

(see chapter 2.3.14)
(see chapter 2.3.2)
can delete the EEPROM and reset the unit to factory default settings.
Note: Please note, by deleting the EEPROM also the user settings are lost an reset to factory de-
faults. After resetting the unit type must be checked and if necessary set to the actual unit type.
Setting parameter
Humidifying mode
Fan power
Set humidity value
Timer program
Timer
Buzzer
Unit type
Calibr. Internal
Calibr. Radio
Filter hours
Error history
Act.Value Source
Buzzer
0
press key >3 seconds
With this function you
EEPROM
Clear
delete EEPROM:
modify
confirm
Buzzer
New Value
cancel
Buzzer
Old Value
Factory setting
H
1
45 %rh
deleted
off
off
PH15
0
0
0
–
internal
Buzzer
0
0 ... 3