Checking The Error Relay; Checking The Error Led (Red) - Defensor H15A Service Manual

14
2.3.10

Checking the error relay

(see chapter 2.3.9)
Error relay
(see chapter 2.3.11)
With this function you can check the error relay. The error relay must switch audibly when the error
relay is switched on and off. If the fan and the centrifuge/drum drive are running, they must stop as
soon as the error relay is switched on.
2.3.11

Checking the error LED (red)

(see chapter 2.3.10)
LED1 Error
(see chapter 2.3.12)
With this function you can check the red error LED. If switched on the LED must light.
switch on
Off
switch off
switch on
Off
switch off
Error relay
On
LED1 Error
On