2.3.4
Operating status of the level switch
(see chapter 2.3.3)
Float switch
Closed
(see chapter 2.3.5)
Note: This is a display function only.
Operating status:
2.3.5
Operating status of the safety switch
(see chapter 2.3.4)
Sec.float switch
Closed
(see chapter 2.3.6)
Note: This is a display function only.
Operating status:
Closed (water level in the base tub too low, warning 7 should be displayed)
Open (max. operation level in the base tub reached or exceeded)
Closed (water level in the base tub below the maximum admissible level)
Open (maximum admissible water level exceeded, error 2 should be dis-
played)
11