Surround/Upper Cover And Safety Interlock Switch Replacement - KitchenAid KSB5010 Service & Repair Manual

Fig. 53) Install the insulation around and in front of the motor
Fig. 54) route the motor wires through the opening in the
insulation
Surround/Upper Cover and Safety
Interlock Switch replacement
58. Make sure the upper cover is secured to the
surround cover (Fig. 55) and that the upper blender
seal is in place on the upper cover (see step 14 and
Fig. 15).
Fig. 55) secure the upper cover to the surround cover
59. Slide the upper/surround cover assembly into place
such that the upper cover slides underneath of the
lip on the surround housing (Fig. 56). Secure with
the (4) 8-32 x .325 screws removed in step 12 (Fig.
57).
Slide upper/surround assembly under the top edge of
the surround housing (red arrows)
Fig. 56) slide the upper/surround cover assembly into place
Fig. 57) secure the (4) screws that hold the upper/surround
cover assemblies into place
60. Reinstall the jar bumper to the jar release lever on
the inside of the surround cover by turning it
clockwise with the large flat blade screwdriver (Fig.
58).
- 23 -