Type; Units; Use The And - Honeywell T775U2006 Installation Instructions Manual

1. SETUP
SETUP
SENSORS
SENSOR A

TYPE

Fig. 27. Setup - Sensors - Sensor A - Type.
SETUP
SENSORS
SENSOR A

UNITS

Fig. 28. Setup - Sensors - Sensor A - Units.
SETUP
SENSORS
SENSOR A
UNITS
Fig. 29. Setup - Sensors - Sensor A - Units.
SETUP
SENSORS
SENSOR A
TYPE
PT 1000
0-5V
0-10V
4-20MA
SELECT
TYPE FOR
SENSOR A
M24589A
SETUP
SENSORS
SENSOR A
UNITS
DEG F
DEG C
SELECT
UNITS FOR
SENSOR A
M24590
SETUP
SENSORS
SENSOR A
UNITS
DEG F
DEG C
PSI
IN WC
% RH
PA
KPA
PPM
NONE
SELECT
UNITS FOR
SENSOR A
M24591A
T775U SERIES 2000 CONTROLLER
1.2.2.1. TYPE
(Sensor A only)
1. From the Sensor A selections, use the
buttons to highlight TYPE.
2. Press the button to display the type values.
3. Use the and
value PT1000 (1097Ω PTC), 0-5V, 0-10V, or 4-
20MA.
Default: PT1000
NOTE: The default label PT1000 refers to a 1097Ω PTC
temperature sensor.
4. Press the button to accept the units and return to
the Sensor A selections.
5. For PT1000 (1097Ω PTC) temperature sensors, go
to "1.2.2.2.1. UNITS (Sensor A or B; PT1000
[1097W PTC)]".
For 0-5V, 0-10V, and 4-20MA sensors, go to
"1.2.2.2.2. UNITS (Sensor A only; 0-5V, 0-10V, or 4-
20mA)"
1.2.2.2.1. UNITS
(Sensor A or B; PT1000 [1097Ω PTC)]
If Sensor A is configured for °F or °C units, then the units
selection does not appear for Sensor B, since Sensor B
uses the units specified for Sensor A.
1. From the Sensor A selections, use the
buttons to highlight UNITS.
2. Press the button to display the temperature units.
3. Use the and
Default: F (Fahrenheit)
4. Press the button to accept the units and return to
the Sensor A selections.
Continue with "1.2.2.3. CALIBRATE (Sensor A or B)".
1.2.2.2.2. UNITS
(Sensor A only; 0-5V, 0-10V, or 4-20mA)
1. From the Sensor A selections, use the
buttons to highlight UNITS.
2. Press the button to display the units list.
3. Use the and
and highlight the desired unit of measure.
You may need to scroll up or down to view all units.
Default: F (Fahrenheit)
4. Press the button to accept the units and return to
the Sensor A selections.
15
buttons to highlight the desired
buttons to highlight F or C.
buttons to scroll through the list
62-0255–05
and
and
and