Show Rt (Show Run Time Hours); Exit Options Setup; Setting Up The Relays - Honeywell T775U2006 Installation Instructions Manual

1. SETUP
SETUP
OUTPUTS
OPTIONS
SHOW RT
Fig. 50. Setup - Outputs - Options - Show Runtime.
Fig. 51. Setup - Outputs - Options - Exit.
SETUP
OUTPUTS
RELAY 1
Fig. 52. Setup - Outputs - Relay Menu.
SETUP
OUTPUTS
RELAY 1
SCHEDULE
Fig. 53. Setup - Outputs - Relay - Schedule.
SETUP
OUTPUTS
OPTIONS
SHOW RT
YES
NO
USE
RUNTIME
FOR
RELAYS
M24612
SETUP
OUTPUTS
OPTIONS
USE SCHED
MIN OFF
DI OPTION
SHOW RT
EXIT
M24613
SETUP
OUTPUTS
RELAY 1
SCHEDULE
RESET
RESET RT
EXIT
M24614
SETUP
OUTPUTS
RELAY 1
SCHEDULE
YES
NO
USE
SCHEDULE
FOR
OUTPUTS
M24615
T775U SERIES 2000 CONTROLLER

1.3.3.4. SHOW RT (show run time hours)

1. Press the button to display the Show RT values.
2. Use the and
Default: YES
3. Press the button to accept the value and return to
the Options menu.
Selecting YES shows the RT (run time) hours for each
relay on the home screen displays.
NOTE: Run times can be reset to zero for each individ-
ual relay. You must do this for each relay that
you want to reset to zero. See "1.3.4.3. RESET
RT (run time)" on page 24.

1.3.3.5. Exit Options Setup

Press the button to exit the Options set up and return to
the Outputs menu.
or
Use the and buttons to highlight EXIT and press the
button.
Continue with "1.3.4. Setting up the Relays".

1.3.4. Setting up the Relays

1. From the Outputs menu, use the
to highlight the desired relay (1 or 2).
2. Press the button to display the selected Relay
menu.
Continue with the remainder of this section to setup the
relay outputs.
1.3.4.1. SCHEDULE
This selection displays only if "Use Sched = YES" is
selected during the Output Options setup (see page 21).
When selected, individual outputs default to follow the
schedule.
1. Press the button to display the Schedule values.
2. Use the and
Default: YES
3. Press the button to accept the value and return to
the Relay menu.
An individual output can be selected to be controlled or
not controlled by the schedule.
If NO is selected, the Setback selection does not appear
in the Program menu for this output.
23
buttons to select YES or NO.
and
buttons to select YES or NO.
62-0255–05
buttons