Lyric Controller Programming Guide
Change Installer Code
Programming Field
Installer Code
Change Language
Programming Field
Language
Program System Type
Programming Field
RF Jam
RF House Code
Two Way Voice
Events - Log All
Events - Log Alarm
DATA FIELDS
Function and Action
1. The current four-digit Installer Code is displayed on the left side
of the screen. Select "Clear".
2. Enter a new four-digit Installer Code on the displayed keypad.
The system will display the new code on the left side of the
screen.
3. Select "Done" when you are finished.
4. The system returns to the "System Programming" Screen.
1. If applicable, select "Language" to display the following options:
Installer Language
2. Select "Installer Language" OR User Language. The system toggles between the
following options:
English
French
Spanish
Portuguese
3. Select the desired language.
4. Select "Save" when you are finished.
5. A confirmation screen appears. If "Yes" is selected, the System returns to the
second page of the Programming screen, which will be displayed in the selected
language.
Function and Action
Enable or disable RF Jam Detection, Log & Reporting Options.
Options:
Disabled
RF Jam Log
RF Jam Log & Report
Enter a two-digit code (00-31) and select "Done".
Enable or disable Two Way Voice communication with the Central
Station.
The system toggles between "Disabled" and "Enabled".
Enable or disable multiple options for event logging (i.e.; alarms,
troubles, open/close & bypass).
The system toggles between "Log All Set" and "Press To Log All"
NOTE:
Selecting "Press to Log All" will set all of the remaining options to
"Enabled".
Enable or disable Alarm Event Logging
The system toggles between "Disabled" and "Enabled".
Function and Action
User Language
- 8 -
Programmed
Default
4112
Programmed
Default
RF Jam Log
0
Disabled
Press to Log All
Enabled