Fingerprint Reader Assembly; Prepare The Computer For Disassembly (Preparation For Disassembly - HP EliteBook 850 G6 Maintenance And Service Manual

Fingerprint reader assembly

Table 6-14 Fingerprint reader and bracket descriptions and part numbers
Description
Fingerprint reader assembly (includes cable)
Fingerprint reader bracket
Before removing the fingerprint reader assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the keyboard (see
5. Remove the RJ-45 board and bracket (see
6. Remove the fan (see
7. Remove the system board (see
Remove the fingerprint reader assembly:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket to the computer.
2. Lift the bracket from the fingerprint reader assembly (2).
3. Use a tool to loosen the fingerprint reader board (3), and then remove the assembly from the computer
(4).
Reverse this procedure to install the fingerprint reader assembly.
64 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 44).
Keyboard on page 40).
RJ-45 board with bracket on page
Fan on page 59).
System board on page
32).
32).
51).
61).
Spare part number
L63365-001
L63367-001