Connections To The Vx-44D/-55D And Dhd Controller; Connector Panel Access; Connecting The Dhd Controller To The Vx-44D/-55D - Runco 1080p Owner's Operating Manual

Proceed as follows to connect the DHD Controller to the VX-44d/-55d, your video
sources, external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
To access the connector panel, pull firmly on the cable access cover to open it.
Connect the HDMI and RS-232 outputs from the DHD Controller to the corresponding
inputs on the VX-44d/-55d; see Figure 3-8.
Serial No
Runco International
Union City, CA
Model
Video Processor / Controller
HDMI Out
HDMI OUT
Figure 3-8. Connecting the VX-44d/-55d to the DHD Controller
Runco VX-44d/-55d Owner's Operating Manual
INPUTS
R/Pr G/Y B/Pb H V
HD1
HD2
R/Pr G/Y B/Pb H V
SDI
Pb Pr Y
HDMI 1 HDMI 2 Option Component Video
SYSTEM CONTROL INTERFACE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
IR
1 2 3
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
S-Video 1
100-230VAC 50-60 Hz, 165 Watts Max
Video S-Video 2 RS-232 Out RS-232 Control Made In USA
RS-232
OUT
29
3.7
Connections to the
VX-44d/-55d and DHD
Controller

Connector Panel Access

Connecting the DHD
Controller to the
VX-44d/-55d
!
Installation