Runco 1080p Owner's Operating Manual page 27

1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. ON / OFF
Press to turn the projector on or off.
3. ENTER
Press to select a highlighted menu item or confirm a changed setting.
4. Cursor Buttons ( ,
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema -
Virtualwide 2.35
DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3)
- Anamorphic
Virtualwide 2.35 is available only on the VX-44d/-55d/CineWide
Note
and only on the analog inputs (HD/RGB, SD Component,
Composite and S-Video). For more information about aspect ratios,
refer to Table 4-1.
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video
2 - S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 -
HD/RGB 2 - HDMI 1 - HDMI 2
5. LIGHT
Press to illuminate the buttons.
6. MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
The UP, DOWN, LEFT, RIGHT, ENTER and MENU buttons are
Note
functional only when an analog source (HD/RGB, SD Component,
Composite or S-Video) is selected.
7. VIDEO (1)
Press to select Composite video input as the source or to enter the numeric
character "1."
8. COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character "2."
Runco VX-44d/-55d Owner's Operating Manual
, , )
15
Controls and Functions