Controller Connection; Connecting 12-Volt Trigger Outputs To External Theater Equipment - Runco 1080p Owner's Operating Manual

Installation
RS-232 Controller
Connection
Connecting 12-Volt
Trigger Outputs to
External Theater
Equipment
➤
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 83.
1
Pb Pr Y
Component Video Video
to Automation/
Control System
or PC
Figure 3-13. RS-232 Control System Connection
➤
If your VX-44d/-55d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-14.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
TRIGGERS
IR
2 3
S-Video 1
S-Video 2 RS-232 Out RS-232 Control
34
5 4 3 2 1
9 8 6
7
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)
Runco VX-44d/-55d Owner's Operating Manual