Enerzone Harmony 2.3 Installation And Operation Manual page 23

5.1.2 Door Adjustment
In order for the stove to burn at its best efficiency, the door must provide a perfect seal with the
firebox. Therefore, the gasket should be inspected periodically to check for a good seal. The
gasket seal may be improved with a simple latch mechanism adjustment:
1. Remove the split pin by pulling and turning it using pliers.
2. Turn the handle one counterclockwise turn to increase pressure.
3. Reinstall the split pin with a small hammer.
Figure 10: Removing the split pin
5.1.3 Replacing the Door Gasket
It is important to maintain the gasket in good condition. After a year or more of use, the door
gasket will compress and become hard, which may allow air to leak. The condition of the door
seal can be verified by closing and latching the door on a strip of paper. The test must be
performed all around the door. If the paper slips out easily anywhere, it is time to replace the
gasket.
Figure 12: Door gasket seal verification
It is important to replace the gasket with another having the same diameter and density to
maintain a good seal.
Installation and Operation Manual - Harmony 2.3
Figure 11: Installing the split pin
Page 23