Zone Heating And How To Make It Work For You; The Benefits Of Low Emissions And High Efficiency - Enerzone Harmony 2.3 Installation And Operation Manual

Table of Contents

Advertisement

2.4 Zone Heating and How to Make it Work for You

This stove is a space heater, which means it is intended to heat the area it is installed in, as well
as spaces that connect to that area, although to a lower temperature. This is called zone heating
and it is an increasingly popular way to heat homes or spaces within homes.
Zone heating can be used to supplement another heating system by heating a particular space
within a home, such as a basement, a family room or an addition that lacks another heat source.
Houses of moderate size and relatively new construction can be heated with a properly sized
and located wood stove. Whole house zone heating works best when the stove is in the part of
the house where the family spends most of its time. This is normally the main living area where
the kitchen, dining and living rooms are located. Locating the stove in this area will give the
maximum benefit of the heat it produces and will achieve the highest possible heating efficiency
and comfort. The space where the most time is spent will be warmest, while bedrooms and
basement (if there is one) will stay cooler. In this way, less wood is burnt than with other forms
of heating.
Although the stove may be able to heat the main living areas of the house to an adequate
temperature, it is strongly recommended to also have a conventional oil, gas or electric heating
system to provide backup heating.
The success of zone heating will depend on several factors, including the correct sizing and
location of the stove, the size, layout and age of your home and your climate zone. Three-season
vacation homes can usually be heated with smaller stoves than houses that are heated all winter.

2.5 The Benefits of Low Emissions and High Efficiency

The low smoke emissions produced by the special features inside this stove firebox mean that
the household will release up to 90% less smoke into the outside environment than if an older
conventional stove was used. But there is more to the emission control technologies than
protecting the environment.
The smoke released from wood when it is heated contains about half of the energy content of
the fuel. By burning the wood completely, this stove releases all the heat energy from the wood
instead of wasting it as smoke up the chimney. Also, the features inside the firebox allow control
of the air supply meaning controlling the heat output, while maintaining clean and efficient
flaming combustion, which boosts the efficient delivery of heat to the home.
The emission control and advanced combustion features of this stove can only work properly if the fuel
used is in the correct moisture content range of 15% to 20%. See section
«3. Fuel»
of this manual for
suggestions on preparing fuelwood and judging its moisture.
The SBI Commitment to You and the EnvironmentThe SBI team is committed to protecting the
environment, so we do everything we can to use only materials in our products that will have no
lasting negative impact on the environment.
2.5.1 What is This Stove Made Of?
The body of this stove, which is most of its weight, is carbon steel. Should it ever become
necessary many years in the future, almost the entire stove can be recycled into new products,
thus eliminating the need to mine new materials.
Page 12
Installation and Operation Manual - Harmony 2.3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eb00045

Table of Contents