Siemens SIMATIC TI505 Installation And Operation Manual page 62

M
Manuals, ix
Memory
quick reference chart, A-2
types, A-2
Memory types
See also CP 525 memory types
absolute address, A-11
analog I/O bytes, A-11
counter, A-10
data block, A-4
extended analog I/O bytes, A-11
extended data block, A-5
flag bytes, A-8
input bytes, A-6
output bytes, A-7
S5-supported types, 1-5
system address, A-11
timer, A-9
Modem interface ports
connector type, 3-5
pin assignments, 3-5
specifications, 3-6
N
Non-intelligent modems, 3-6
P
Personality Interface Module
description, 1-2
installing, 2-8
slot location, 1-3
PIM. See Personality Interface Module
Pin assignments
CP 525 connector, 2-5
local line, 3-3
modem (RS-232), 3-5
S5 Adapter connector, 2-5
Primitive command set, 1-5
Index-2
Primitive commands
configuration, B-4
define block, B-7
exception, B-2
gather block, B-8
native, B-3
primitive format configuration, B-5
read block, B-5
read random block, B-6
status, B-4
write and gather block, B-9
write block, B-6
write random block, B-7
Primitive exceptions, C-2
Programmable controllers, 1-2, 1-4
Programming, CP 525 module, 2-3
Protocol
HDLC, 3-8
network, 3-8
RK 512, 1-2
R
Redundant media
alternate channel port, 3-7
transmission, 3-7
Runaway transmitter recovery, 3-6
S
S5 interface
pin assignments, 2-5
ports, 2-4, 2-6
S5 UniLink Adapter
components, 1-2
description of, 1-2
models, 3-2
setting up, 2-2
S5-supported primitives, 1-5
S5 PLCs, 1-2