Siemens SIMATIC TI505 Installation And Operation Manual page 11

Purpose of this
Manual
Related Manuals
S5 UniLink Adapter Installation and Operation
This manual is intended to help you accomplish the tasks required to install
and operate the S5 UniLink
Interface Module (PIM).
This manual assumes that you are already familiar with the contents of the

TIWAY I Systems Manual and the UNILINK Adapter Installation &
Operation Manual.
The information in this manual is supplemented by the following manuals.
•
TIWAY I Systems Manual (PPX:TIWAY–8101)
•
TIWAY I UNILINK Host Adapter User's Manual (PPX:TIWAY–8121)
•
UNILINK Adapter Installation and Operation Manual
(PPX:TIWAY–8106)
The TIWAY I System Manual provides more information on the installation
and operation of your TIWAY I network. The UNILINK Adapter Installation
& Operation Manual details the installation and operation of the UNILINK
Adapter. Refer also to the user manuals for any other TIWAY I network
devices that you have installed or will be installing.
Additional information is found in the following SIMATIC S5 manuals.
•
COM 525 Manual, Volumes 1 and 2 (6ES5 998–1DB21)
•
Automating with the SIMATIC S5–135U (A19100-L531-F505-X-7600)
The COM 525 Manuals provide complete information on installing and
programming your CP 525 module. The Automating with the SIMATIC
S5–135U manual provides a thorough background of the SIMATIC S5 135U
programmable controller (PLC).
NOTE: Throughout this manual, all references to the CP 525 module apply
equally to the CP 524 module, as both of these models are compatible with
the S5 UniLink Adapter.

Adapter with the SIMATIC S5 Personality
Preface
Preface ix