Local Line Interface Ports; S5 Unilink Adapter Models - Siemens SIMATIC TI505 Installation And Operation Manual

S5 unlink adapter
Hide thumbs Also See for SIMATIC TI505:
Table of Contents

Advertisement

3.1

Local Line Interface Ports

Overview
Local Line
Interface Ports
3-2
TIWAY I Network Communication
The S5 UniLink Adapter is available in four models, offering a choice of two
physical interfaces for network communications: Local Line or RS-232-C
interfaces, in different voltage versions. Table 3-1 lists the model numbers,
the type of interface, and the supply voltage for each model.
Table 3-1 S5 UniLink Adapter Models
Model Number
PTI:505–7115
PTI:505–7116
PTI:505–7117
PTI:505–7118
More information on the media types can be found in the TIWAY I Systems
Manual and in the UNILINK Adapter Installation and Operation Manual.
The Local Line interface to TIWAY I is a female 9-pin D connector. Two
ports are provided (see Figure 3-1) for the following purposes.
Port 1 is the primary network port.
Port 2 provides support for redundant media transmission when Ports
1 and 2 are connected to a redundant twisted-pair cable network.
Dual Local Line media ports
Figure 3-1 Local Line Interface Ports
Network Port
Dual Local Line
Dual RS-232C/423
Dual Local Line
Dual RS-232C/423
RS-232 S5 Interface Port
Port
Port
1
2
S5 UniLink Adapter Installation and Operation
Supply Voltage
120 VAC
120 VAC
240 VAC
240 VAC
Power Connections
Port
Port
AC
3
4
NEUT
1 2 3 4 5
AC
GND
LINE
I/O
A000654

Advertisement

Table of Contents
loading

Table of Contents