Mitsubishi Electric apricot MS660 Owner's Handbook Manual page 57

E x p a n s i o n c a r d s
5/8 MS660 OWNER'S HANDBOOK
8. Secure the card by replacing the screw that you removed in
Step 4.
9. Connect any necessary signal cables to the card. If the card that
you are installing makes use of the ATI Multimedia Channel
(AMC) connector then you need to connect the ribbon cable
to the AMC/VFC connector on the motherboard.
Warning Warning
The AMC connector is an extension to the VFC and has extra pins for
supporting multimedia modes. Be extremely careful when connecting the
ribbon cable to the AMC/VFC connector. Some of the pins carry power
and any improper use can result in damage to the upgrade board.
10. Check to ensure no other cables or connectors have become
dislodged and replace the system unit cover.
11. Read the manuals supplied with the card and follow any other
installation requirements, such as software etc.