Download  Print this page

Mitsubishi Electric apricot MS660 Owner's Handbook Manual Page 64

Hide thumbs

Advertisement

Fitting the new processor
To fit the upgrade processor:
1.
Take the upgrade processor out of its anti-static packaging.
Hold the processor by its edges and avoid touching the metal
pins.
◊ The upgrade processor and the ZIF socket are keyed to
ensure that the processor is installed in the correct
orientation. One corner of the socket has a key hole (see
below). The corresponding corner of the processor is
slightly bevelled and has a positioning guide in the form of
a coloured dot.
1
Keyed corner
2.
Ensure that the securing lever on the ZIF socket is still in the
upright position, then place the processor in the socket,
making sure that it is correctly aligned and that you do not
bend or otherwise damage the pins.
S y s t e m U p g r a d e s
1
2
2
MS660 OWNER'S HANDBOOK
Positioning guide
6/7

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: