Mitsubishi Electric apricot MS660 Owner's Handbook Manual page 3

Power Up
1
When you have
connected your system
press the Power button to
turn the computer on.
When the system unit
is powered the power
indicator on the left of
the front panel will light
up. If nothing happens,
check your connections and
supply switch.
Refer to the "Troubleshooting" chapter in the Owner's Handbook if you
encounter any problems.
Remember that the monitor has its own power switch; see the monitor's
User's Guide for details.
The Standby button can be used to both place the system into an energy
The system will now perform a self-test routine and then display the message,
'Starting Windows 95'. This will take several minutes the first time you
switch on, during which time the computer will reboot several times
and you will be requested to register your copy of Windows 95.
fully
T
COM PAC
saving mode or restore it to
normal operation. Next
to this button is an
LED which lights
up during either of
the Energy Saving
modes.
details are provided
on the last page of this
guide.
Further