I n t e r n e t a n d s e c u r i t y
MS660 OWNER'S HANDBOOK
You will be able to change any of the items in your branding details by
running the Apricot Electronic Fingerprinting application later and
entering the correct password. This would be necessary, for example, if
you moved house.
After you have entered your details you will be prompted to set a
password. This prevents anybody else from gaining access to your
personal details or changing them. Optionally, for extra security
Electronic Fingerprinting can be set such that this same password is
requested every time the computer is switched on.
When you have entered all the details and any chosen passwords,
the final step is to select 'OK'. The information now has to be
written to the read only memory built onto the motherboard. This
will take a few moments and a message saying this will appear. Do
not switch off while this is going on.
Until you have entered your branding details, the Apricot Electronic
Fingerprinting application will automatically run each time
Window 95 starts. Thereafter, the program can be run by selecting
its icon which is displayed at the top of the Start bar menu. You will
be asked to enter your password.
Please refer to the on-line help file for detailed information.
If you set a Power On Password in the system BIOS, this will still be
effective and must be entered. It will be requested immediately AFTER
the fingerprint password has been verified.