Other side panel
This panel only needs to be removed for access to the drive bay
fixing screws. No other components can be reached from this side.
1.
Remove the two panel securing screws.
2.
Slide the panel carefully towards the rear of the system using
the handle provided.
3.
After about 2 to 3 cm movement it is possible to lift the panel
vertically clear of the system.
The access window to the drive mounting screws is now clearly
visible. For instructions on fitting drives see the chapter on
upgrading your system.
I n t r o d u c i n g y o u r c o m p u t e r
MS660 OWNER'S HANDBOOK
1
10 10 1
2
1/7