Mitsubishi Electric apricot MS660 Owner's Handbook Manual page 56

3
1 Full length PCI
2 Full length PCI/ISA shared slot
5. If the card you are installing is configured by the means of
jumpers or switches, check that it is correctly configured before
proceeding.
Note Note
If the card uses the video feature connector (VFC) on the motherboard,
you may need to connect this before you install the card (otherwise, the
card could get in the way of the connector). Please also refer to the notes
given below.
6. Position the expansion card alongside the slot in which you
wish to install it. If the card is full length, align the end of the
card with the slot in the rear of the fan assembly.
7. Slide the card into the slot ensuring that the card edge
connector engages correctly with the socket on the riser board.
Do not use excessive force.
E x p a n s i o n c a r d s
1
2
1
10 10 1
2
3
MS660 OWNER'S HANDBOOK
Full length ISA
5/7