Standards - Mitsubishi Electric apricot MS660 Owner's Handbook Manual

External Speakers (where supplied)

Standards

Safety
Electro-magnetic Compatibility (EMC)
German Acoustic Noise Regulation
Notes
Legalities
ii SAFETY AND REGULATORY NOTICES
Always switch off or disconnect the AC supply before disconnecting any of
the speaker leads, whether audio or power. Disconnect the AC supply
when equipment is not used for a period of time.
To prevent the risk of electric shock, do not remove speaker covers.
Connecting the speaker power cord to any other cords or joining cords
together can cause fire and risk of electric shock.
This product complies with the European safety standard EN60950 plus
amendments 1, 2, 3 and all European country deviations.
This product complies with the following European EMC standards:
Emissions
Immunity
This product also complies with the following International EMC standards:
VCCI level 2 (Japan)
Sound power level is less than 70 dB(A) according to DIN 45635 Part 19
(ISO 7779).
All interconnecting cables (e.g. Microphone, headphone and speaker) and
communication cables should be less than 2 metres in length. If cable
extensions are used, ensure adequate earth connections are provided and
screened cables are used.
This equipment complies with the following European Directives:
Low Voltage Directive
EMC Directive
CE Marking Directive
and where applicable:
Telecommunications Directive
Caution Caution
This system complies with the CE marking directive and its strict legal
requirements. Use only Apricot tested and approved parts. Failure to do so may
result in invalidating both the compliance and your warranty. All expansion
cards or upgrade components must carry CE marking.
EN55022
EN50082
Class B
Level 2
73/23/EEC
89/336/EEC
93/68/EEC
91/263/EEC