Chapter 10 Text Overlay
Purpose:
Configure the OSD on the captured pictures and videos.
10.1 Configuring Single Picture Overlay
Purpose:
You can configure the overlay information of the captured single picture.
Steps:
1. Go to Configuration > Device Configuration > Text Overlay > Single Picture
Overlay.
2. Check Capture Picture Overlay.
3. Configure the parameters below.
Percentage: the percentage of the information overlaid on the picture.
Font Size: the font size of the overlay information.
Foreground Color: the foreground color of the overlay information.
Background Color: the background color of the overlay information.
User Manual of Network Traffic Camera revise
Configuration
Figure 10-1 Single Picture Overlay
44