Configuring Redundant Storage - HIKVISION iDS-TCM203-A User Manual

1) Select the day to set the record schedule.
2) Set all-day record or segment record.
If you want to configure the all-day recording, check the All Day checkbox.
If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
Notes:
 The time of each segment cannot be overlapped. Up to 4 segments can
be configured.
 The default record type is Normal and you cannot edit it.
3) Check Select All and click Copy to copy settings of this day to the whole
week. You can also check any of the checkboxes before the date and click
Copy.
4) Click OK to save the settings and exit from the interface.
6. Click Save to save the settings.

9.5 Configuring Redundant Storage

Purpose:
You can manage the storage, view the HDD information, format the HDD, etc.
Steps:
1. Go to Configuration > Device Configuration > Encoding and Storage >
User Manual of Network Traffic Camera revise
Figure 9-5 Edit Record Schedule
39