Raven CR7 Operation Manual page 36

2. If desired, select Tramlines Setup. The Tramlines Setup window will open.
NOTE: Tramlines are spaces between rows that are not planted so future
operations in that field (such as spraying) will not drive over rows of
crops.
3. In the S1: Enter the number of swaths before the first tramline or extra wheel
width wills start. Typically, this will be the number of planter swaths it takes to
apply half of the sprayer width.
NOTE: Adjust any of the cells on the Tramlines Setup page automatically
adjusts the Sprayer Width cell on the right side of the window.
4. In the W1: Enter the value for the extra width of one of the side tires. This is
typically the wheel width plus a few inches.
5. In the W2: Sprayer Wheel Width 2 cell, enter the width between the sprayer
wheels.
6. In the S2: Swath Between Tramlines cell, desired number of swaths between the
tramlines. Generally this will be the number of planter swaths it takes to cover one
pass for the sprayer.
7. Press Accept
PLAN OVERVIEW
The plan overview screen displays the full plan. Each plan consists field regions, lines,
and offsets specific to that field. From this page, the user can add, edit, or remove
regions. Any changes to the regions will be reflected in the plan overview screen.
34
. The Region Settings window will open.