Iso Boom Configuration; Scs Configuration - Raven CR7 Operation Manual

1. On the settings page, press the Machine
Configuration window will open.
2. Press Add Drawn Equipment
3. Select the desired cart type from the <Select Cart> drop-down or select Create
New Cart.
4. After selecting Create New Cart the Create New Cart screen will open. If creating
a new cart continue with the process. If selecting an existing cart, skip to step 11.
5. Enter the desired name.
6. Select if the cart is a Two Wheel Cart or Four Wheel Cart.
7. Press Next
8. Enter the distance from the center of axle to the front of the tongue.
9. Press Next
open. Enter the distance between the two axles. If a Two Wheel Cart it the
Distance: Axle to Hitch screen will open.
10. Enter the distance from the center to the rear axle to the back hitch.
11. Press Accept
12. Press Mount Equipment. The drawn equipment is now mounted to the
implement.
13. To edit a piece of Drawn Equipment, press the Edit
14. To unmount a piece of Drawn Equipment, reset the configuration then add select
the desired tractor again.
NOTE: Resetting an implement or piece of equipment will not delete previously
created profiles but will place it back in the inventory.
. The Distance: Tongue to Axle will open.
. If a Four Wheel Cart the Distance: Axle to Axle window will
.
button. The machine
. The Select Cart window will open.
button.
25